Hello,
I have been looking to get a boat dolly/cart for my Intex Mariner 4 Inflatable boat for some time now, and have even considered building my own, as they do not seem to sell one for it.
Then I came across the Hobie website and I think one of the plug-in carts would be perfect for my purposes. I was wondering if someone could tell me which of the models would best suit my needs. I was thinking of using the existing motor mount brackets/holes (eyelet) on the boat to essentially "plug-in" one of the carts and be able to easily transport my boat to and from shore. I've attached some pictures of my boat. Basically I need to know whether the plug-in cart would fit either through the holes for the motor mount or if I could somehow rig it up through one of the handles? The dimension are as follows: the diameter of each motor mount "eyelet/hole" is roughly 19-22mm and the distance from one "eyelet/hole" to the other is roughly 27.5-28.5cm. Would any of the plug-in carts from hobie fit for my boat? Thank you very much in advance...
Rudy T.
ps below is the link to the album with two (internet) pictures of the boat