Hobie Cat Forums

It is currently Thu Apr 17, 2014 10:13 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Mon Jul 30, 2012 12:46 pm 
Offline
Site Rank - Deck Hand

Joined: Sun Mar 11, 2012 7:32 am
Posts: 17
Location: Spokane, WA
Got a new PA12' and have a trailer that I want to see if the Cradles will work on. My problem is I am a little cramped on space. If the cradle raises the PA up too high, I won't be able to fit it into my lower level of a 2 level trailer. I currently have 2 Bunks that are about 65" apart and have 2 10' sections of 2" pvc on them. The crisscross pattern of the Bunks and PVC would work but I was hoping for something more stable.

The cradles are a pair, front and rear. So what I need are the HxWxL of each. I have looked thru Google and I can see pics, but need the dimensions.

If you have any other ideas, please let me hear them...!

Bill in Spokane, WA
2009 Outback - Olive
2011 Outback - Yellow
2012 PA12' - Olive

_________________
Bill in Spokane
Hobie Outback Yellow
Hobie Outback Olive
Hobie PA 12'
Native Water Craft Mariner 12.5 Propel


Top
 Profile  
 
PostPosted: Mon Jul 30, 2012 12:56 pm 
Offline
Site Rank - Captain

Joined: Sun Aug 16, 2009 3:24 pm
Posts: 88
Location: Waverley,Nova Scotia,Canada
Bill,
If you go to page 2 of this forum there is a thread by Tom Kirkman about Tandem Trailers with lots of photos. I think you could modify your trailer utilizing the PVC such as he did and not have any problem with height on your first layer. Good luck!!
Regards........


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: Bobhornet, Google [Bot] and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group