Hobie Cat Forums
It is currently Thu May 23, 2013 12:50 pm

View unanswered posts | View active topics


Board index » Hobie Islands » Transportation / Storage

All times are UTC - 8 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
kayakman7
 Post subject: TI in a pickup bed
PostPosted: Wed Aug 15, 2012 11:01 am 
Offline
Site Rank - Admiral

Joined: Wed Oct 19, 2011 6:02 am
Posts: 292
Location: Cape Coral, FL
I recently loaded my TI into the bed of my pickup, ended up with a slight overhang.
Image

_________________
2011 Golden Papaya TI with a 250 square foot spinnaker!
also a more manageable 100 square foot spinny...
&
the TI3 rear ama mod
Top
 Profile  
 
PassWind
 Post subject: Re: TI in a pickup bed
PostPosted: Wed Aug 15, 2012 12:56 pm 
Offline
Site Rank - Old Salt

Joined: Mon Jun 14, 2010 10:43 am
Posts: 309
Location: Long Island NY
how big was the dent in the underside of the hull after unloading ?

_________________
Alan W.
'07 Hobie Adventure Island #1
'07 Hobie Adventure Island #2 Golden Papaya AI LadyJane
... both in Golden Papaya
'06? Hobie Outback SUV
Top
 Profile  
 
NOHUHU
 Post subject: Re: TI in a pickup bed
PostPosted: Wed Aug 15, 2012 1:09 pm 
Offline
Site Rank - Old Salt

Joined: Tue May 18, 2010 2:31 pm
Posts: 2154
Location: Kailua 96734
:shock: Yeah -That's like being "slightly pregnant" :lol:
Top
 Profile  
 
kayakman7
 Post subject: Re: TI in a pickup bed
PostPosted: Wed Aug 15, 2012 6:08 pm 
Offline
Site Rank - Admiral

Joined: Wed Oct 19, 2011 6:02 am
Posts: 292
Location: Cape Coral, FL
There was absolutely no denting. What you can barely see in the photo is a "bed slide" that supports the boat evenly from five foot back to thirteen foot back. Worked really well.

_________________
2011 Golden Papaya TI with a 250 square foot spinnaker!
also a more manageable 100 square foot spinny...
&
the TI3 rear ama mod
Top
 Profile  
 
NOHUHU
 Post subject: Re: TI in a pickup bed
PostPosted: Wed Aug 15, 2012 7:45 pm 
Offline
Site Rank - Old Salt

Joined: Tue May 18, 2010 2:31 pm
Posts: 2154
Location: Kailua 96734
Funny, we can't see your safety flag either. :lol:
Top
 Profile  
 
KayakingBob
 Post subject: Re: TI in a pickup bed
PostPosted: Wed Aug 15, 2012 7:49 pm 
Online
Site Rank - Old Salt

Joined: Fri Jan 05, 2007 9:21 pm
Posts: 1963
Location: Maui, Hawaii
It's Hi-vis yellow but not "My whole boat is a safety flag" red :)

_________________
Image
http://KayakingBob.com - - - - - - - - - - - - - - - - - - - - - - - - - - - 2007, 2009 & 2010 Hobie AIs and a 2010 TI
Top
 Profile  
 
tonystott
 Post subject: Re: TI in a pickup bed
PostPosted: Thu Aug 16, 2012 2:38 am 
Offline
Site Rank - Old Salt

Joined: Sat Nov 05, 2011 1:58 am
Posts: 794
Location: Forster, NSW
Kayakman7, you need one of these
Image
Top
 Profile  
 
kayakman7
 Post subject: Re: TI in a pickup bed
PostPosted: Thu Aug 16, 2012 4:54 am 
Offline
Site Rank - Admiral

Joined: Wed Oct 19, 2011 6:02 am
Posts: 292
Location: Cape Coral, FL
tonystott wrote:
Kayakman7, you need one of these
Image

I do, I like that a lot.

_________________
2011 Golden Papaya TI with a 250 square foot spinnaker!
also a more manageable 100 square foot spinny...
&
the TI3 rear ama mod
Top
 Profile  
 
tonystott
 Post subject: Re: TI in a pickup bed
PostPosted: Thu Aug 16, 2012 6:03 am 
Offline
Site Rank - Old Salt

Joined: Sat Nov 05, 2011 1:58 am
Posts: 794
Location: Forster, NSW
I got a sailmaker to cut it out of a cheap hi-viz worker vest (which only cost me $4.99 at the local Aldi store)
Top
 Profile  
 
PassWind
 Post subject: Re: TI in a pickup bed
PostPosted: Thu Aug 16, 2012 6:09 am 
Offline
Site Rank - Old Salt

Joined: Mon Jun 14, 2010 10:43 am
Posts: 309
Location: Long Island NY
tonystott wrote:
Kayakman7, you need one of these
Image



Rudder condom ? looks like you had a blowout. Never thought of duct taping them before but :idea:

_________________
Alan W.
'07 Hobie Adventure Island #1
'07 Hobie Adventure Island #2 Golden Papaya AI LadyJane
... both in Golden Papaya
'06? Hobie Outback SUV
Top
 Profile  
 
trapperjohn
 Post subject: Re: TI in a pickup bed
PostPosted: Wed Aug 22, 2012 9:37 pm 
Offline
Site Rank - Deck Hand

Joined: Thu Feb 09, 2012 9:20 pm
Posts: 16
kayakman7 wrote:
I recently loaded my TI into the bed of my pickup, ended up with a slight overhang.
Image


LMAO! I see your bed x-tender, but it does look like 6+ feet of overhang... I hope nothing bad happens on extended trips. I have a more ghetto setup for my AI :D A darby X-tend-a-bed extender, a piece of 4'X8' omb, and leftover carpet... I have maybe 3' of overhang from my '04 dodge quad 1500... My red shop rag tucked under the rudder bungee tops the masterpiece off! I've traveled 2+ hours one way on California Interstates 25+ times with no problems.
Top
 Profile  
 
tonystott
 Post subject: Re: TI in a pickup bed
PostPosted: Thu Aug 23, 2012 2:45 am 
Offline
Site Rank - Old Salt

Joined: Sat Nov 05, 2011 1:58 am
Posts: 794
Location: Forster, NSW
PassWind wrote:
tonystott wrote:
Kayakman7, you need one of these
Image



Rudder condom ? looks like you had a blowout. Never thought of duct taping them before but :idea:

Passwind, that is not duct tape. The rudder cover has been made from a Hi-vis safety vest, so the "duct-tape" is actually retro-reflective material for night visibility.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Hobie Islands » Transportation / Storage

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group