I have been trying to build my own track slide (rollers on a mat to move the cat on the beach), it was not a success...All I had to go on was the HC 21 SC video starring Matt. What did I do wrong ? I had 2 lengths of vinyl where I had 15 plastic bathroom tubing each sewn in. When testing this the vinyl was torn from the rollers where the underside of the boat made contact with it. Maybe I should have left the tubing uncovered and fastened underneath to the vinyl ? Is the boat supposed to slide on the "naked" plastic rollers ? Can somebody help me with this ? A few pictures maybe ? Thanks !!! Michel
Thanks for your answer : problem solved, I think ! I remove the vinyl from the PVC tubes an fix them at the bottom (facing away from the hull) to the vinyl... Here is my Email address : firstname.lastname@example.org A few pictures would help of course, again thanks !! Michel
I am also interested in making these track slide, I would love to get a look at some pictures if possible, I am sure it would clear up the construction questions up I have. Thanks to anyone who could help?
I also keep my cat on the beach. I bought 4 x8 sheet of pvc lattace from lowes cut it in half and use that as a track. Its not really portable but for my home beach its perfect' just keep it under the boat.
Joined: Tue May 27, 2003 12:44 pm Posts: 7875 Location: Oceanside, California
I am also interested in making these track slide, I would love to get a look at some pictures if possible, I am sure it would clear up the construction questions up I have. Thanks to anyone who could help? Jen
Imagine a rope ladder... rungs are pvc or polyethylene pipes... "rope" part is a sheet of vinyl tramp material with grommets at "step" locations... rope thru pipes holds them at the step locations. Tramp material lays on the sand to keep the pipes above the sand. Otherwise they sink. If on hard ground... a simple rope ladder would work.
There is a scene in the 21SC promo video that shows it @ 2:29