Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 11:06 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: TI swivel cleat mod
PostPosted: Sat Feb 02, 2013 2:36 pm 
Offline
Site Rank - Admiral

Joined: Wed Oct 10, 2012 11:20 pm
Posts: 273
Location: London UK
Just got back from wetting the ti's head. There will be some video up tomorrow.

In the meantime some things need to be sorted. One being swapping the front sheet cleat for a swivel version. I dropped into a chandlery on the way back but all the harken models seem to bases with three holes.

There are some spinlock models that look good.

What experience is out there before I make a mistake.

Also as we have left the boat there what diameter are the main sheet lines?

Cc

_________________
May the odds be ever in your favor..
Image


Top
 Profile  
 
 Post subject: Re: TI swivel cleat mod
PostPosted: Sat Feb 02, 2013 3:00 pm 
Offline
Site Rank - Old Salt

Joined: Tue Jul 19, 2005 6:29 pm
Posts: 2763
Location: High Point, NC
I'm pretty sure they're quarter inch. I bought some 5/16th as replacement and it's definitely larger than the original.


Top
 Profile  
 
 Post subject: Re: TI swivel cleat mod
PostPosted: Sat Feb 02, 2013 3:51 pm 
Offline
Site Rank - Captain

Joined: Wed Aug 31, 2011 6:35 am
Posts: 53
Location: Canberra, Australia
Chopcat,

I have been using a Ronstan RF67 swivel cleat for the past 12 months. It has 3 bolt holes, but I have just been using 2 holes that just happen to align with the existing Harken cleat holes in the crossbar!

Image

I regularly sail in good breezes (ie. 15kts +) and the two bolt attachment is holding up very well.

_________________
Rob,

Image
2011 Hobie TI


Top
 Profile  
 
 Post subject: Re: TI swivel cleat mod
PostPosted: Sat Feb 02, 2013 5:52 pm 
Offline
Site Rank - Old Salt

Joined: Wed Oct 19, 2011 6:02 am
Posts: 318
Location: Cape Coral, FL
8 32

_________________
2011 Golden Papaya TI with a 250 square foot spinnaker!
also a more manageable 100 square foot spinny...
&
the TI3 rear ama mod


Top
 Profile  
 
 Post subject: Re: TI swivel cleat mod
PostPosted: Sat Feb 02, 2013 6:43 pm 
Offline
Site Rank - Old Salt

Joined: Thu Aug 16, 2007 2:25 pm
Posts: 2863
Location: Central Coast NSW Australia
I just replaced my TI mainsheet with a 6mm line. Works well.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group