Hobie Cat Forums

It is currently Thu Sep 18, 2014 4:04 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: AI main sheet mod
PostPosted: Wed Feb 27, 2013 10:25 pm 
Offline
Site Rank - Deck Hand

Joined: Sat Jan 29, 2011 11:19 pm
Posts: 22
Location: Gold Coast, Australia
So i finally sussed out how to post pics on the site (thanks Nohuhu) so i thought i would share some of the mods i have done. You may recognise some of them as i have taken a lot of inspiration from other peoples mods.
Thanks guys.

This one is similar to Spooks furling line mod or Joshs (Yakass) mainsheet mod.
I find the main sheet line can be difficult to pull in heavy winds and personally i don't like the extreme angle the line has when it comes out of the block on the forward part of the AI.
So firstly I decided to make a Teflon packer to lift the pulley up to create a straight line from the rear pulleys to the cleat for the main sheet.
Image
I then made another one for the main sheet cleated and mounted that just in front of the rudder cleat.
Image
Finding the position was difficult as I wanted to be able to bolt the cleat down and there is minimal clearance for the washer and bolt inside the hull on the port side. You also have the moulding for the pad-eye to screw into to be mindful of as well.
Image
Here is the end result. I plan to put a block on the rear where the line goes through the pad eye, something like a TI has and if it needs it a block on the front oar moulding.
Image


Top
 Profile  
 
 Post subject: Re: AI main sheet mod
PostPosted: Fri Mar 01, 2013 8:44 am 
Offline
Site Rank - Admiral

Joined: Fri Dec 02, 2011 4:09 pm
Posts: 184
Location: Perth West Australia
Nice work,
I am also having a look at better furling line and possibly the main sheet cleat points on my TI. It is rigged a bit differently to an AI but has a few of the same problems too.

_________________
Geordie
West Ausie


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group