Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 9:55 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Thu Mar 14, 2013 8:25 am 
Offline
Site Rank - Admiral

Joined: Tue Jun 23, 2009 6:24 pm
Posts: 249
Location: Grand Rapids, MICHIGAN
Where is a good place to get a cart of sorts... I've been at my home lake since getting into Hobies and I want to start going out to Lake Michigan and places where I'll need to roll it over sand... WOULD LOVE USED.

Ron


Last edited by Rojoyinc on Thu Mar 14, 2013 8:57 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: CAT TRAX OR dolly? HELP
PostPosted: Thu Mar 14, 2013 8:56 am 
Offline
Site Rank - Admiral

Joined: Tue Jun 23, 2009 6:24 pm
Posts: 249
Location: Grand Rapids, MICHIGAN
Which to get? I see in the catalog - DOLLY but is that heavy looks like a trailer? can I throw that in the back of the pickup?

I'm looking for EASIEST to pull - best rolling. Would probably be over sand MOST of the time, but hard packed at times too.

SOFT wheels or hard plastic?

Do the hulls stay in place on those thin axles? or would the hull cradles be worth the extra expense?

I like the DOLLY because it has TWO contact points on each hull, so not teetering... and includes handle. Else I can get CAT TRAX and add handle option
and cradles and have more invested than DOLLY.

So leaning toward dolly - but how heavy is it? can it be loaded and unloaded from a pickup by one person?


Top
 Profile  
 
PostPosted: Thu Mar 14, 2013 9:09 am 
Offline
Site Rank - Old Salt

Joined: Mon May 09, 2005 10:25 am
Posts: 4176
Location: Jersey Shore
Cat trax with inflatible tires. These are by far the most popular dolly for Hobies and they work very well.

If you have two or more people, there's no need for cradles (on a H16) or a handle - just tie the ropes to the shroud anchors. If you're trying to put the wheels under single handed, cradles would probably help since otherwise the spinning axle will allow the wheels to roll out from under the boat before you can tie them in place.

We have a set of these that's 20 years old and still running strong. I'm sure other folks have sets that are even older. It's a good product.

sm


Top
 Profile  
 
PostPosted: Sun Apr 21, 2013 9:03 pm 
Offline
Site Rank - Old Salt

Joined: Wed Dec 28, 2005 12:56 pm
Posts: 740
Location: Los Angeles
I prefer Cat Trax, not the plastic. SRM is right and I recommend the cradles. The center of gravity is about 1' 8" aft the shrouds and you'll need cradles to keep your wheels there. I placed markings on the inside of the hulls for quick accuracy. You can roll the boat anywhere you want single handed with ease. Otherwise, you'll have to use all your weight to hold the bow down while moving.

While trailering, I kept the wheels on the stern of the boat.
Image

One foot, eight inches aft the shroud is center of gravity for easy balancing !!!
Image

_________________
Image
Happy Sailing,

David


Top
 Profile  
 
PostPosted: Mon Apr 22, 2013 6:37 am 
Offline
Site Rank - Old Salt

Joined: Fri Dec 28, 2007 11:23 am
Posts: 599
Location: Lake Norman NC
Real rubber tire Cat Trax by far the best even rolls my HC21 @ 650 lbs
Second choice is the hard plastic Cat Trax which work ok
I have seen many homemade systems and none come close
Former Hobie Admiral Gary


Top
 Profile  
 
PostPosted: Mon Apr 22, 2013 11:25 am 
Offline
Site Rank - Old Salt

Joined: Mon May 24, 2004 10:33 am
Posts: 686
Location: Clinton, Mississippi
DavidBell47 wrote:
While trailering, I kept the wheels on the stern of the boat


David: I assume you've had no problems carrying you Cat Trax that way? I have cradles and was considering it, but I'm hesitant since I often trailer long distance and our roads aren't the best. Thanks!

_________________
Jerome Vaughan
Hobie 16


Top
 Profile  
 
PostPosted: Mon Apr 22, 2013 12:42 pm 
Offline
Site Rank - Old Salt

Joined: Fri Apr 13, 2012 7:35 pm
Posts: 626
Location: Tuscaloosa, AL
rattle 'n hum wrote:
DavidBell47 wrote:
While trailering, I kept the wheels on the stern of the boat


David: I assume you've had no problems carrying you Cat Trax that way? I have cradles and was considering it, but I'm hesitant since I often trailer long distance and our roads aren't the best. Thanks!

I thought Mississippi had a Road Tax??? Are the roads over there still just as rough as they were years ago?


Top
 Profile  
 
PostPosted: Mon Apr 22, 2013 2:24 pm 
Offline
Site Rank - Admiral

Joined: Fri Apr 13, 2012 9:06 am
Posts: 277
Location: Charlotte, NC
sxrracer wrote:
rattle 'n hum wrote:
DavidBell47 wrote:
While trailering, I kept the wheels on the stern of the boat


David: I assume you've had no problems carrying you Cat Trax that way? I have cradles and was considering it, but I'm hesitant since I often trailer long distance and our roads aren't the best. Thanks!

I thought Mississippi had a Road Tax??? Are the roads over there still just as rough as they were years ago?



It's all relative. I can tell, blindfolded, when I cross the border into Louisiana cause the potholes get bigger. :lol:

_________________
Jonathan
'85 H16 __/) 87468 Tidal Wave
Image


Top
 Profile  
 
PostPosted: Mon Apr 22, 2013 5:41 pm 
Offline
Site Rank - Old Salt

Joined: Fri Apr 13, 2012 7:35 pm
Posts: 626
Location: Tuscaloosa, AL
I wasn't even gonna mention Louisiana!!!


Top
 Profile  
 
PostPosted: Tue Apr 23, 2013 10:39 am 
Offline
Site Rank - Old Salt

Joined: Mon May 24, 2004 10:33 am
Posts: 686
Location: Clinton, Mississippi
sxrracer wrote:
I thought Mississippi had a Road Tax??? Are the roads over there still just as rough as they were years ago?


When I wrote "our" roads, I wasn't just referring to MS. I travel through AL quite a bit too! :P

_________________
Jerome Vaughan
Hobie 16


Top
 Profile  
 
PostPosted: Tue Apr 23, 2013 11:43 am 
Offline
Site Rank - Old Salt

Joined: Fri Apr 13, 2012 7:35 pm
Posts: 626
Location: Tuscaloosa, AL
Our roads are perfect.............................. about every 10 feet!


Top
 Profile  
 
PostPosted: Tue Apr 23, 2013 6:58 pm 
Offline
Site Rank - Old Salt

Joined: Wed Dec 28, 2005 12:56 pm
Posts: 740
Location: Los Angeles
rattle 'n hum wrote:
DavidBell47 wrote:
While trailering, I kept the wheels on the stern of the boat


David: I assume you've had no problems carrying you Cat Trax that way? I have cradles and was considering it, but I'm hesitant since I often trailer long distance and our roads aren't the best. Thanks!


Have had no problems, whatsoever. I sat the cradles on the stern as a template since that was the most critical issue.

Image

As a result, the bottom of the hulls sat just outside the center of the cradles which adds slightly to the resistance lessening the hulls propensity to slide. You may also want to consider the tongue weight of your loaded trailer. Mine was slightly heavy before so adding the wheels did it justice. The beach wheels are so close (laterally) to the trailer wheels that it didn't make a lot of difference. Hope this helps.

_________________
Image
Happy Sailing,

David


Top
 Profile  
 
PostPosted: Wed Apr 24, 2013 10:50 am 
Offline
Site Rank - Old Salt

Joined: Mon May 24, 2004 10:33 am
Posts: 686
Location: Clinton, Mississippi
Thanks, David....I'm gonna try this. My trailer is really heavy duty, and I usually travel with my large sail box full of junk, so I think the tongue weight difference will be negligible.

And sxracer.....every ten feet would be great. For us I think it's ten years!

_________________
Jerome Vaughan
Hobie 16


Top
 Profile  
 
PostPosted: Wed Apr 24, 2013 8:46 pm 
Offline
Site Rank - Old Salt

Joined: Thu Apr 24, 2008 3:58 am
Posts: 593
Location: Knoxville, TN
A couple of years ago I trailered a Hobie 16 from Shreveport to Destin and back with the wheels on top of the stern, like in David's picture, and they rode just fine.

_________________
Mark Van Doren
H16 Seabreeze #112205 (Richard Petty Signature Edition)
H14T Fantasia #47787
San Juan 28


Top
 Profile  
 
PostPosted: Thu Apr 25, 2013 7:04 am 
Offline
Site Rank - Admiral

Joined: Mon Jun 04, 2012 10:08 am
Posts: 215
Location: Prince Edward Island, Canada
Hey David,
Maybe an old question but why is your boat named after nerve pain?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group