So, I decided to use West System 105/206 for a hull repair, bottom job.
Sure lots of folk recommended that I use Polyester resin and indeed I purchased some Blue Gee resin.
But I am up against the clock as wish to take the boat on our holiday leaving this Friday.
I dismantled the hull from the tramp frame, it came off surprisingly hassle free after a couple of knocks with a rubber mallet.
This hull appears to have been repaired in the past and I suspected epoxy had been used for this, i didn't want to take the chance with polyester resin as I understand that Poly resin does not adhere to epoxy but epoxy will adhere to Poly resin and being against the clock decided on epoxy resin.
Link to Polyester vs Epoxy thread:
viewtopic.php?f=20&t=48553So my question is what can I use as a paint?
Looking for something quick, easy and cheap.
I intend to do a complete overhaul of the boat on my return, including stripping the old decals buffering up the original gell coat etc
Kind Regards,
SRG