Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 8:11 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Fri Oct 25, 2013 8:27 am 
Offline
Site Rank - Captain

Joined: Sat Aug 17, 2013 5:16 am
Posts: 55
Location: LA (Lower Alabama)
Can you buy the same floor mat material in sheets that Hobie uses on the deck of PAs?

I am familiar with the SeaDek material that has been discussed here. I am looking for the same material that Hobie uses to cover a couple of areas that I generate a lot of noise with.

_________________
Alan
2012 PA14 Papaya
2014 PA14 Dune

"If you must choose between two evils, pick the one you've never tried before!"


Top
 Profile  
 
PostPosted: Fri Oct 25, 2013 9:21 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15026
Location: Oceanside, California
Hobie doesn't sell it in sheets, but this is pretty widely used on SUP, Jet Skis etc.

http://www.hydroturf.com/

http://hydroturf.com/products.php?cat=Sheets%20of%20Hydro-Turf

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
PostPosted: Fri Oct 25, 2013 10:51 am 
Offline
Site Rank - Captain

Joined: Sat Aug 17, 2013 5:16 am
Posts: 55
Location: LA (Lower Alabama)
As always, thanks for the quick response Matt!

Sorry for another clarifying question, is it the SUP or the PWC?

I want to match exactly what's on there. I called Hydro Turf this morning after your post and learned the SUP is a bit thicker, softer, and more of a brushed surface of the two. The gent at the supplier that I spoke with knew Hobie was a big customer but said he wasn't sure what you typically order.

Heads up to others, be sure to let Hydro Turf know you are using it on a boat made of plastic when you order it. They provide it with a different adhesive than the norm.

_________________
Alan
2012 PA14 Papaya
2014 PA14 Dune

"If you must choose between two evils, pick the one you've never tried before!"


Top
 Profile  
 
PostPosted: Fri Oct 25, 2013 4:18 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15026
Location: Oceanside, California
We order by die cut part number that doesn't tell me which material, but...

40 x 62 Sheets - PWC & Boating Looks right... Groove cut

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
PostPosted: Mon Nov 04, 2013 5:49 am 
Offline
Site Rank - Captain

Joined: Wed Apr 17, 2013 8:06 pm
Posts: 34
Sea Dek makes a full package for PA 12 and 14. Check out Red Fish Chucks boat pictures.


Top
 Profile  
 
PostPosted: Mon Nov 04, 2013 1:13 pm 
Offline
Site Rank - Old Salt

Joined: Tue Feb 21, 2012 8:41 pm
Posts: 951
Location: Lake Park, GA
Stevemcnerney wrote:
Sea Dek makes a full package for PA 12 and 14. Check out Red Fish Chucks boat pictures.


SeaDek hasn't officially released any kit for the PA14 yet (at least not online). Just the PA12 kit which is missing one underseat pad and no rear cargo area.

_________________
Steve Stubbs
USAF (retired)

SeaDek Fishing Team
Unfair Lures Pro Staff
Ziptailz Ambassador

2015 Pro Angler 14 - Papaya
2018 Compass - Sea Grass


Top
 Profile  
 
PostPosted: Thu Nov 07, 2013 7:13 am 
Offline
Site Rank - Captain

Joined: Sat Aug 17, 2013 5:16 am
Posts: 55
Location: LA (Lower Alabama)
Stevemcnerney wrote:
Sea Dek makes a full package for PA 12 and 14. Check out Red Fish Chucks boat pictures.

Thanks Steve. Yes I have seen the posts ref. Sea Dek.

I am looking to add a few small pieces on the sides of the seat and that is it. I have owned four PAs in the past and currently own two. They get used big time and get really dirty, slimed, and grungy since I fish very often. I find the material that comes on them to be quite durable, not slick with fish slime is on it, and I have found it easy enough to maintain it. So just looking to replicate it and this approach is much more attractive from a cost perspective.

Thanks again to Matt for helping me locate the supplier and the spec.

_________________
Alan
2012 PA14 Papaya
2014 PA14 Dune

"If you must choose between two evils, pick the one you've never tried before!"


Top
 Profile  
 
PostPosted: Thu Nov 07, 2013 7:37 am 
Offline
Site Rank - Old Salt

Joined: Tue Feb 21, 2012 8:41 pm
Posts: 951
Location: Lake Park, GA
Alphonse wrote:
Stevemcnerney wrote:
Sea Dek makes a full package for PA 12 and 14. Check out Red Fish Chucks boat pictures.

Thanks Steve. Yes I have seen the posts ref. Sea Dek.

I am looking to add a few small pieces on the sides of the seat and that is it. I have owned four PAs in the past and currently own two. They get used big time and get really dirty, slimed, and grungy since I fish very often. I find the material that comes on them to be quite durable, not slick with fish slime is on it, and I have found it easy enough to maintain it. So just looking to replicate it and this approach is much more attractive from a cost perspective.

Thanks again to Matt for helping me locate the supplier and the spec.


I looked at that supplier link that Matt provided. They do have a nice variety of material and I'm sure all of it is very durable. If you end of getting some of it, post some shots of the new material installed. I'm hoping to fish both days this weekend. Once I retire in a few years, I figure I'll live in the PA...lol. Have a great weekend!

_________________
Steve Stubbs
USAF (retired)

SeaDek Fishing Team
Unfair Lures Pro Staff
Ziptailz Ambassador

2015 Pro Angler 14 - Papaya
2018 Compass - Sea Grass


Top
 Profile  
 
PostPosted: Thu Nov 07, 2013 8:19 am 
Offline
Site Rank - Captain

Joined: Sat Aug 17, 2013 5:16 am
Posts: 55
Location: LA (Lower Alabama)
SRAces wrote:
Alphonse wrote:
Stevemcnerney wrote:
Sea Dek makes a full package for PA 12 and 14. Check out Red Fish Chucks boat pictures.

Thanks Steve. Yes I have seen the posts ref. Sea Dek.

I am looking to add a few small pieces on the sides of the seat and that is it. I have owned four PAs in the past and currently own two. They get used big time and get really dirty, slimed, and grungy since I fish very often. I find the material that comes on them to be quite durable, not slick with fish slime is on it, and I have found it easy enough to maintain it. So just looking to replicate it and this approach is much more attractive from a cost perspective.

Thanks again to Matt for helping me locate the supplier and the spec.


I looked at that supplier link that Matt provided. They do have a nice variety of material and I'm sure all of it is very durable. If you end of getting some of it, post some shots of the new material installed. I'm hoping to fish both days this weekend. Once I retire in a few years, I figure I'll live in the PA...lol. Have a great weekend!



Okay will try
This is a good forum but I have found it too time consuming and unfriendly to post photos here.

_________________
Alan
2012 PA14 Papaya
2014 PA14 Dune

"If you must choose between two evils, pick the one you've never tried before!"


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group