I took the rudders off and measured the holes. Compared to the template, holes were off center as much as 1/4 inch. So, I put them back together and adjusted the cam plate as far forward as possible, this time with a thin walled socket and was able to gain a little forward. I have just about eliminated slop on port side, starboard still has a little play, but not as much as before. I'll check the helm next time it blows when I am off.
Thanks for the support.
My dealer is Tackleshack, Pinellas Park, FL.
If still a bad or unexceptable helm, I'll take them back and give them your blessing