|
John, I had a vertical crack in my H-18 comptip. It was the along the seam in the front of the mast only in the outer plastic. I took of the top cap & removed the plug. Open the crack a little with a Dremel tool & mix epoxy & color it black. Have someone hold a vaccuum to the end & pour some epoxy in, it will just suck in. Add some filler to thicken & fill the crack with out the vaccuum. let dry, sand, replace plug & cap & try it. Mine has held up in a race where the wind gusts were 40+
_________________ DVL 1989 H-18 Worlds Boat, Magnum Wings & Spinnaker
dale.vanlopik"at"att"dot"net
|