Hobie Cat Forums

It is currently Thu Dec 25, 2014 6:05 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Fri Jul 01, 2005 11:25 am 
Offline
Site Rank - Captain

Joined: Mon Nov 22, 2004 7:18 pm
Posts: 73
Location: League City, Texas, USA
Question for Greg and Jacques:

Have you guys tried the STX main on the Tiger yet? If so, any ideas on mast pre-bend and spreader rake?

A couple of us Texas Tiger sailors got the new mains in time for the Great Texas catamaran race. It seems to give the boat an edge downwind (we didn't get much upwind time).

We are using our setting from the "old" square top at the moment: 1.5" rake and 1.5" prebend (about 900lbs on the diamond wire tension).

Just wondering if you'd heard any useful tips about the STX from the Europeans?

Chris.

_________________
2008 Hobie Tiger


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 01, 2005 12:22 pm 
Offline
Site Rank - Old Salt

Joined: Thu Nov 13, 2003 10:00 am
Posts: 383
Location: Long Beach, CA
I took the STX sail out for a test ride last weekend. My old main was really tired and I was going to have to buy a sail either way. I thought that the shape without changing anything on the diamond wires was pretty nice. I run 1.75 and 1.75 with 800lbs on the diamonds.

We are going to have a couple of the STX sailing together this weekend. Unforturnately we will not have the other sail to compare with. We will be sailing with a Nacra F18 in the mix though. I will call someone to see if I can muster up someone with an older cut to race with us. It is just a one day Yacht Club regatta, on Saturday, that does not bring out too many cat sailors.

Later,
Dan


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 05, 2005 12:33 pm 
Offline
Hobie Tech / Moderator

Joined: Tue May 27, 2003 3:16 pm
Posts: 301
Location: San Diego
We just put up our new STX main for the first time this weekend and we left all of the settings for the mast the same as with the ST sail; 1 3/4 spreader rake and 1 3/4 mast prebend. We didn't notice much difference as we were able to pace with our tuning partner about the same as before. Maybe with a little more time on the boat we'll make some adjustments but it seemed to work ok with the same settings.

FYI, about a month ago we asked Bundy the same question and he told us to keep our setting as is.

_________________
Greg Thomas
Hobie Factory Team


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group