Hobie Cat Forums

It is currently Tue Oct 21, 2014 6:48 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Fri Mar 05, 2010 7:58 pm 
Offline
Site Rank - Deck Hand

Joined: Fri Nov 07, 2008 4:48 pm
Posts: 17
Location: Sioux Falls SD
Hi-

I'm fixing up my 1986 H17 for racing, I know they have moved the boom mainsheet bale forward up the boom since then to accomodate more mast rake. Does anyone with a late model boat, or one that races with full mast rake know their distance from end of boom to attacment point of the bale? My bale connection point is at 8 3/4 inches from very end of boom.

Thanks, for pulling out a ruler!
Paul

_________________
Paul Bommersbach

pbommersbach@sio.midco.net


Top
 Profile  
 
PostPosted: Tue Mar 09, 2010 12:37 pm 
Offline
Site Rank - Old Salt

Joined: Mon May 09, 2005 10:25 am
Posts: 2588
Location: Jersey Shore
I don't know the exact number, but three or four inches forward will put you in the ballpark.

I had an older boat with the boom bale in the original position. I wanted to install a second bale farther forward, but figured I'd test the location out before drilling the boom. I took some modern high-strength cordage (1000 lb breaking strength or so), tied a few loops around the boom and then tied the loops to the existing bale to keep them from sliding forward. I figured that way I could re-position the test bale until I figured out where I wanted it. In the end, it worked so well that I never touched it. Only took it off when I sold the boat because I figured someone would look at it and think something was wrong with the boom.

sm


Top
 Profile  
 
PostPosted: Tue Mar 09, 2010 3:01 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 9126
Location: Oceanside, California
The drawing says 11 3/4" forward of the aft end of the extrusion (not including the casting) Angled at 12 degrees.

Was 9" and 30 degrees.

Looks like it changed in 88, but the drawing is not real clear on the revision date.

_________________
Matt Miller
Director of Parts and Accessory Sales
Hobie Cat USA


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group